Angle Clip – AC-86

An angle clip is an L-shaped bracket used to anchor one structural or masonry member to another, forming a bolted or welded connection between the two legs of the angle. The AC-86 is one of the stock angle clips in Krando’s line, fabricated in our 75,000 sq ft facility and available in the gauges and finishes listed below.

The AC-86 is supplied with pre-punched holes so it can be fastened or anchored in the field without additional drilling. For the exact leg dimensions, overall length, and hole diameter and spacing of this part, refer to the AC-86 product drawing or request a quote and our team will confirm the geometry for your application. The AC-86 differs from the related AC-85, AC-95, and AC-96 clips in its leg and hole configuration, so review the drawing for each to select the clip that matches your connection.

Finishes

Type 304 Stainless Steel
Type 316 Stainless Steel
A36 Steel Hot Dipped Galvinized

Thicknesses

16 gauge
10 gauge
3/8 inch
12 gauge
3/16 inch
other
1/8 inch
1/4 inch

Applications & Compatibility

The AC-86 angle clip is used to anchor and connect structural and masonry members. Typical applications include:

Structural steel connections
Anchors one steel member to another in bolted or welded seated and framing connections.

Masonry and stone anchoring
Serves as an angle clip anchor tying masonry or stone components back to the structural frame.

Deck and framing attachment
Attaches decking, framing, or supporting members to primary structural elements.

Fastener compatibility
Pairs with standard bolts, anchor rods, or welded connections suited to the clip’s hole configuration and material thickness.

Material options
Available in Type 304 and Type 316 stainless steel and hot-dipped galvanized A36 steel to match the corrosion and strength requirements of your job.

Custom configurations
If the stock AC-86 doesn’t match your connection, Krando’s in-house engineering can modify the clip or fabricate a custom angle clip to spec.